This guide is for the common situation where the fitting works, but the light is landing in the wrong place. On existing outdoor points, aiming is often a straightforward part of the visit, but the fitting and mounting position still decide how much can actually be improved.

Typical adjustments

  • Re-aim an adjustable head, lamp or bracket so the useful light lands where people actually walk.
  • Reduce glare and wasted spill while keeping the entrance or path easier to use.
  • Check whether the sensor direction still makes sense once the light is aimed properly.

What can change the scope

  • Some sealed one-piece fittings offer very little adjustment, so a different fitting may be the real answer.
  • If the real issue is false triggers or missed movement, PIR setup may matter as much as beam direction.
  • If the area is simply too wide or awkward for one point to cover, a broader outdoor-lighting plan may make more sense.
  • Weathered fittings, poor previous work, brittle seals or awkward access can turn a simple aiming visit into replacement or repair work.
Official sources and further guidance

Need a quick answer on outdoor light aiming?

Send your postcode, a daylight photo, a dusk or night photo if possible, and a close-up of the fitting. I’ll say whether this looks like a simple re-aim, sensor setup or a better-fitting swap.